Bearing Strength Capacity of Continuous Supported Timber Beams: Unified Approach for Test Methods and Structural Design Codes-Reference-Cited by-同舟云学术

Bearing Strength Capacity of Continuous Supported Timber Beams: Unified Approach for Test Methods and Structural Design Codes

Published:2012-02 Issue:2 Volume:138 Page:266-272
ISSN:0733-9445
Container-title:Journal of Structural Engineering
language:en
Short-container-title:J. Struct. Eng.

Author:

Leijten A. J. M.¹²³⁴,Franke S.¹²³⁴,Quenneville P.¹²³⁴,Gupta R.¹²³⁴

Affiliation:

1. Associate Professor, Eindhoven Univ. of Technology, Eindhoven, Netherlands (corresponding author). E-mail: A.J.M.Leijten@tue.nl

2. Research Fellow, Auckland Univ., Auckland, New Zealand.

3. Professor, Auckland Univ., Auckland, New Zealand.

4. Professor, Oregon State Univ., Corvallis, OR 97331.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29ST.1943-541X.0000454

Reference22 articles.

1. ASTM. (2008). “Standard methods of testing small clear specimens of timber.” Designation D198-09 ASTM West Conshohocken PA.10.1520/D0198-09

2. Basta C. T. (2005). “Characterizing perpendicular-to-grain compression in wood construction.” M.S. thesis Oregon State Univ. Corvallis OR.

3. Blass H. J. and Görlacher R. (2004). “Compression perpendicular to the grain.” Proc. 8th World Conf. on Timber Engineering Vol. 2 VVT Espoo Finland 435–440.

4. European Committee for Standardization (CEN). (2003). “Structural timber and glued laminated timber—determination of some physical and mechanical properties.” CEN-EN408 Rue de Stassart 36 B-1050 Brussels Belgium.

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Development of a constructive solution of wood columns and crossbars interfaces on metal overlays and screws;Vestnik MGSU;2024-03-30

2. Buckling capacity model for timber screws loaded in compression: Experimental, analytical and FE investigations;Construction and Building Materials;2023-05

3. Capacity models for timber under compression perpendicular to grain with screw reinforcement;European Journal of Wood and Wood Products;2023-01-11

4. Experimental investigation on screw reinforcement of timber members under compression perpendicular to the grain;Engineering Structures;2023-01

5. Computational simulation of light timber framing connections strengthened with self-tapping screws;Journal of Building Engineering;2021-12