Structural Testing and Design of Wire Arc Additively Manufactured Square Hollow Sections-Reference-Cited by-同舟云学术

Structural Testing and Design of Wire Arc Additively Manufactured Square Hollow Sections

Published:2021-12 Issue:12 Volume:147 Page:
ISSN:0733-9445
Container-title:Journal of Structural Engineering
language:en
Short-container-title:J. Struct. Eng.

Author:

Kyvelou Pinelopi¹,Huang Cheng²,Gardner Leroy³^ORCID,Buchanan Craig⁴^ORCID

Affiliation:

1. Research Associate, Dept. of Civil and Environmental Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, UK.

2. Ph.D. Candidate, Dept. of Civil and Environmental Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, UK (corresponding author).

3. Professor, Dept. of Civil and Environmental Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, UK. ORCID: .

4. Lecturer, Dept. of Civil and Environmental Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, UK. ORCID: .

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29ST.1943-541X.0003188

Reference48 articles.

1. The continuous strength method for structural stainless steel design

2. Experimental Study of Cold-Formed Ferritic Stainless Steel Hollow Sections

3. Description of stress–strain curves for stainless steel alloys

4. Experimental study on ferritic stainless steel RHS and SHS beam-columns

5. The Continuous Strength Method for the design of stainless steel hollow section columns

Cited by 49 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Stub column tests on wire arc additively manufactured equal-leg angle sections;Engineering Structures;2024-10

2. Numerical investigation and design methods of the local buckling of WAAM stainless steel circular hollow section stub columns;Thin-Walled Structures;2024-10

3. Study on monotonic and cyclic properties of WAAM low-carbon steel thick plate;Structures;2024-09

4. Tubular sandwich cross-sections fabricated with Wire Arc Additive Manufacturing for jumbo structural members;Structures;2024-09

5. Experiments on the material and stability performance of slender WAAM plated structures;Thin-Walled Structures;2024-09