Splitting Strength of Small Dowel-Type Timber Connections: Rivet Joint Loaded Perpendicular to Grain-Reference-Cited by-同舟云学术

Splitting Strength of Small Dowel-Type Timber Connections: Rivet Joint Loaded Perpendicular to Grain

Published:2014-10 Issue:10 Volume:140 Page:04014064
ISSN:0733-9445
Container-title:Journal of Structural Engineering
language:en
Short-container-title:J. Struct. Eng.

Author:

Zarnani Pouyan¹,Quenneville Pierre²

Affiliation:

1. Ph.D. Candidate, Structural Timber Engineering, Dept. of Civil and Environmental Engineering, Faculty of Engineering, Univ. of Auckland, 20 Symonds St., CBD, Auckland 1142, New Zealand (corresponding author).

2. Professor, Timber Design, Dept. of Civil and Environmental Engineering, Faculty of Engineering, Univ. of Auckland, 20 Symonds St., CBD, Auckland 1142, New Zealand.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29ST.1943-541X.0001039

Reference30 articles.

1. ASTM. (2009). “Standard test methods for small clear specimens of timber.” D143-09 West Conshohocken PA.

2. Begel M. Wolfe R. W. and Stahl D. C. (2004). “Timber rivet connections in US domestic species.” Research Paper FPL-RP-619 US Dept. of Agriculture Forest Products Laboratory Madison WI.

3. Glulam rivets in radiata pine

4. Canadian Standards Association (CSA). (2009). “Engineering design in wood (limit states design).” CAN/CSA-O86.09 Mississauga ON Canada.

5. European Committee for Standardization (CEN). (1998). “Eurocode 5-Design of timber structures.” EN 1995-1-1:1998 Stockholm Sweden.

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Load-carrying capacity of dowelled joints with slotted-in steel plate loaded at an angle to the grain;Structures;2022-01

2. Seismic performance improvement of conventional timber brace using re-centring friction connection;Structures;2020-08

3. Experimental and numerical investigations on load-carrying capacity of dowel-type bolted bamboo joints;Engineering Structures;2020-04

4. Modelling the mechanical behaviour of typical wall-to-floor connection systems for cross-laminated timber structures;Engineering Structures;2018-05

5. Failure of timber constructions;Handbook of Materials Failure Analysis;2018