Steel-Reinforced Columns Made of European Beech Glued-Laminated Timber-Reference-Cited by-同舟云学术

Steel-Reinforced Columns Made of European Beech Glued-Laminated Timber

Published:2024-02 Issue:2 Volume:150 Page:
ISSN:0733-9445
Container-title:Journal of Structural Engineering
language:en
Short-container-title:J. Struct. Eng.

Author:

Sroka Katharina¹^ORCID,Palma Pedro²^ORCID,Steiger René³^ORCID,Strahm Thomas⁴,Gehri Ernst⁵

Affiliation:

1. Ph.D. Candidate, Structural Engineering Research Laboratory, Empa—Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, 8600 Dübendorf, Switzerland; Ph.D. Candidate, Institute of Structural Engineering, ETH Zürich, Stefano-Franscini-Platz 5, 8093 Zurich, Switzerland (corresponding author). ORCID: .

2. Scientist, Structural Engineering Research Laboratory, Empa—Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, 8600 Dübendorf, Switzerland. ORCID: .

3. Senior Scientist, Structural Engineering Research Laboratory, Empa—Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, 8600 Dübendorf, Switzerland. ORCID: .

4. Head of Engineering, neue Holzbau AG, Engineering and Product Planning, Obseestrasse 11, 6078 Lungern, Switzerland.

5. Professor Emeritus, ETH Zürich, Dr. h.c., Rueschlikon 8803, Switzerland.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

https://ascelibrary.org/doi/pdf/10.1061/JSENDH.STENG-12709

Reference60 articles.

1. Abrahamsen R. 2017. “Mjøstårnet-construction of an 81 m tall timber building.” In Proc. 23. Internationales Holzbau-Forum (IHF). Biel Switzerland: Forum Holzbau.

2. Blaß H. J. 1987. “Tragfähigkeit von Druckstäben aus Brettschichtholz unter Berücksichtigung streuender Einflussgrössen” [Load-carrying capacity of compression members made from glued-laminated timber accounting for scatter of influencing variables]. [In German.] Ph.D. thesis Dept. of Timber Structures and Building Construction Karlsruhe Institute of Technology.

3. Blaß, H. J. 1995. “Buckling lengths.” In Timber engineering–STEP 1, B7/1–8. Almere, Netherlands: Centrum Hout.

4. BMEL (Federal Ministry of Food and Agriculture). 2023. “Ergebnisse der Waldzustandserhebung 2022” [Results of the forest status survey 2022]. In Division 515–Sustainable forest management, timber market, [In German.] Bonn, Germany: BMEL.

5. Prestressing wood members;Bohannan B.;For. Prod. J.,1962