Mechanism and Performance of SBS Polymer Dry-Modified Asphalt Mixture with PCB and TPO from Waste Tires-Reference-Cited by-同舟云学术

Mechanism and Performance of SBS Polymer Dry-Modified Asphalt Mixture with PCB and TPO from Waste Tires

Published:2024-06 Issue:6 Volume:36 Page:
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Li Yuanyuan¹,Li Jun²,Bai Tao³,Chen Anqi⁴,Gu Dengjun²,Gao Yangming⁵^ORCID

Affiliation:

1. Associate Professor, School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China.

2. Master’s Candidate, School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China.

3. Professor, School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China (corresponding author).

4. Professor, State Key Laboratory of Silicate Materials for Architectures, Wuhan Univ. of Technology, Wuhan, Hubei 430070, China.

5. Professor, Marie S. Curie Research Fellow Section of Pavement Engineering, Faculty of Civil Engineering and Geosciences, Delft Univ. of Technology, Stevinweg 1, Delft, CN 2628, Netherlands. ORCID: .

Publisher

American Society of Civil Engineers (ASCE)

Link

https://ascelibrary.org/doi/pdf/10.1061/JMCEE7.MTENG-16018

Reference42 articles.

1. Aliotti A. G. 1962. “Carbon black—Its nature and possible effects on the characteristics of bituminous road binders.” In Proc. 1st Australian Road Research Board (ARRB) Conf. Melbourne VIC Australia: Australian Road Research Board.

2. Physicochemical characterization of short and long-term aged asphalt mixtures for low-temperature performance

3. Assessment of carbon black modified binder in a sustainable asphalt concrete mixture

4. Harmless treatment and environmentally friendly application of waste tires—TPCB/TPO composite-modified bitumen

5. Environmental performance and functional analysis of chip seals with recycled basic oxygen furnace slag as aggregate