Analysis of the Inflow Characteristics of Separate Sewer Systems for Rainfall Using an XP-SWMM Model and the SSOAP Toolbox

Abstract

Even after the sewer system rehabilitation project, sewer system-related problems caused by inflow still persist. However, analysis of the characteristics of the inflow has been limited to specific rainfall events and monitoring points. This study analyzed inflow characteristics according to rainfall events using an XP-SWMM model and the Sanitary Sewer Overflow Analysis and Planning (SSOAP) Toolbox. In this study, the XP-SWMM model was built for sewers and collecting pipes in urban areas where classification projects were completed. The R, T, and K parameters were calculated using the SSOAP tool based on the sewer volume data of the study area. The calculated parameters were inputted into the XP-SWMM model and used to analyze R, T, and K of unmeasured sampling intervals. The amount of rainfall-derived inflow and infiltration (RDII) increased according to the amount of rainfall, and the correlation coefficient between the amount of rainfall and the amount of RDII was 0.9352, indicating a high correlation. The results of this study can support efficient facility planning that reflects the rainfall characteristics of specific areas, including areas where actual survey of sewage data is not possible.