Optical and electrical characterization of solar cell with nanowires mimicking antireflection coating layers considering axial and radial PN junctions

Abstract

AbstractIt has been well documented that the usage of a textured cover layer reduces reflection from the air‐solar cell interface, which ultimately enhances the power conversion efficiency (PCE) of a solar cell. The most commonly used patterns, such as pyramids, micropillars, nanowires (NW), and nanoholes have been widely studied and optimized. Besides using such NWs to enhance light absorption, this work also additionally considers the concept of mimicking the antireflection coating of single or multiple layers in minimizing the reflectance and thus enhancing the total absorptance further. It is shown here that at least one order of magnitude shorter multilayer NW pattern of 268 nm total height can outperform a standard NW of 4270 nm height, which needs less material and can also be fabricated at a reduced cost. Furthermore, the proposed design with reduced height has a significantly lower surface‐to‐volume ratio, which also reduces surface recombination loss than the other textured surface patterns. The results presented in this work have been comprehensively analyzed by initially optimizing optical absorption and then completing the electrical simulations. The optimized design in conjunction with a back reflector offers an efficiency as high as 16.434%.