A field evaluation of the SoilVUE10 soil moisture sensor

Abstract

AbstractThe U.S. Climate Reference Network (USCRN) has been engaged in ground‐based soil water and soil temperature observations since 2009. As a nationwide climate network, the network stations are distributed across vast complex terrains. Due to the expansive distribution of the network and the related variability in soil properties, obtaining site‐specific calibrations for sensors is a significant and costly endeavor. Presented here are three commercial‐grade electromagnetic sensors, with built‐in thermistors to measure both soil water and soil temperature, including the SoilVUE10 Time Domain Reflectometry (TDR) probe (hereafter called SP) (Campbell Scientific, Inc.), 50 MHz coaxial impedance dielectric sensor (model HydraProbe, Stevens Water Monitoring Systems, Inc.) (hereafter called HP), and the TDR‐315L Probe (model TDR‐315L, Acclima, Inc.) (hereafter called AP), which were evaluated in a relatively nonconductive loam soil in Oak Ridge, TN, from 2021 to 2022. The HP manufacturer‐supplied calibration equation for loam soils was used in this study. While volumetric water content data from HP and AP were 82–99% of respective gravimetric observations at 10 cm, data from SP were only 65–81% of respective gravimetric observations in the top 20‐cm soil horizon, where soil water showed relatively large spatial variability. The poor performance of the SP is likely due to poor contact between SP sensor electrodes and soil and the presence of soil voids caused by the installation method used, which itself may have caused soil disturbance.