Characterization of the structural and mechanical properties of pinecone fish (Monocentris japonica) scales

Abstract

AbstractIn this paper, the microstructure characteristics and mechanical properties (including nano‐indentation, tensile, and penetration behaviors) of the scales from pinecone fish (Monocentris japonica) were investigated. The M. japonica scales display a unique hierarchical structure and consist of three layers: an outer bone layer with high mineralization, an intermediate bone layer with obvious pore structures, and an inner collagen layer composed of multiple plies of collagen fibers. The hardness and indentation modulus of the three structural layers exhibit gradient changes, and decrease gradually from the outer layer to the inner layer. Tensile tests show that the tensile response and failure modes of the scales are different under dry and hydrated conditions. The dry scales have higher tensile strength (46.35 MPa) and Young's modulus (0.74 GPa), while the hydrated scales exhibit higher ultimate strain (20.18%) and toughness (4.57 MPa). Penetration tests indicate that the scales have a significantly high resistance to penetration, and increase the penetration force by more than six times compared with the descaled skin. Furthermore, the structure–property relationship of the M. japonica scales was discussed. It is found that the hard outer layer and the porous intermediate layer help to disperse the stress, and the soft inner layer containing collagen fiber plies helps to deflect the crack propagation, which are responsible for the excellent mechanical properties of the scales. The outcome of this study can provide a valuable biomimetic design inspiration for lightweight and high‐strength composite materials in engineering fields.Research Highlights Microstructure characteristics and mechanical properties of the Monocentris japonica scales were investigated. The M. japonica scales can be divided into three layers rather than two layers. The M. japonica scales exhibited high tensile strength and penetration resistance.