In‐depth rheological study of acrylic processing aids in rigid polyvinyl chloride applications

Abstract

AbstractAcrylic processing aids are used widely in rigid polyvinyl chloride (PVC) applications. Key functions of processing aids in terms of processing and performance are discussed in the paper. Effect of molecular weight of acrylic processing aids on their functions are studied. Additionally, effect of processing conditions, such as temperature and shear on fusion characteristics of PVC formulations are investigated. Shear rate in the processing was varied by means of rotor speed in torque rheometer. Processing aids of comprehensive molecular weight range are evaluated in the study. It was observed that relatively lower molecular weight processing aids have different response to change in shear and temperature than higher molecular weight processing aids. Depending upon fusion conditions PVC formulations can yield either a single or double fusion peak. Generally, it was considered that ultra‐high molecular weight processing aids yield a double fusion peak, however, it was demonstrated in the studies that it is not true. Fusion conditions, temperature, and shear are the main driving forces of fusion dynamics, resulting in either a single or double fusion peak. Relatively low molecular weight acrylic processing aids can also yield double fusion peak. Melt viscosity and shear thinning properties are also examined. Relatively lower molecular weight processing aids showed higher shear thinning behavior. Effect of temperature and shear on degree of fusion was studied. It was shown that optimum processing parameters can increase the degree of fusion by ~10%.