Shear strengthening of a concrete trough bridge using embedded through‐section (ETS) FRP bars

Abstract

AbstractAs worldwide infrastructure is ageing, significant efforts have been paid to the development of strengthening techniques that will restore or increase the initial capacity of existing structures. Considering that it is expected that shear failure happens in a less ductile mode than that observed under bending actions, special attention has been devoted to shear strengthening methods. These methods included externally bonded fiber reinforced polymers (EB‐FRP), near‐surface mounted (NSM‐FRP) method, and the embedded trough‐section (ETS) technique, among others. In this paper, ETS method is used for the strengthening in shear of a reinforced concrete railway bridge located in Finland. The ETS method consists in the embedment of FRP or steel bars through predrilled holes into the concrete core. The bars are bonded to the concrete using adhesives. The paper includes a brief review of recent advances in the use of ETS and comparison with other available techniques, the description of the case study, instrumentation of the bars using fiber optic sensors (FOS) for strain monitoring, the procedure used for the installation of the bars in the field, and a preliminary analysis of the data collected.