Double‐row 16‐element folded‐end dipole transceiver array for 3D RF shimming of the whole human brain at 9.4 T

Abstract

Homogeneity and longitudinal coverage of transmit (Tx) human head RF coils at ultrahigh field (UHF, ≥7 T) can be improved by 3D RF shimming, which requires using multi‐row Tx arrays. Examples of 3D RF shimming using double‐row UHF loop transceiver (TxRx) and Tx arrays have been described previously. Dipole antennas provide unique simplicity and robustness while offering comparable Tx efficiency and signal‐to‐noise ratio to conventional loop designs. Single‐row Tx and TxRx human head UHF dipole arrays have been previously described by multiple groups. Recently, we developed a novel type of dipole antenna, a folded‐end dipole, and presented single‐row eight‐element array prototypes for human head imaging at 7 and 9.4 T. These studies have shown that the novel antenna design can improve the longitudinal coverage and minimize peak local specific absorption rate (SAR) as compared with common unfolded dipoles. In this work, we developed, constructed, and evaluated a 16‐element double‐row TxRx folded‐end dipole array for human head imaging at 9.4 T. To minimize cross‐talk between neighboring dipoles located in different rows, we used transformer decoupling, which decreased coupling to a level below −20 dB. The developed array design was demonstrated to be capable of 3D static RF shimming and can be potentially used for dynamic shimming using parallel transmission. For optimal phase shifts between the rows, the array provides 11% higher SAR efficiency and 18% higher homogeneity than a folded‐end dipole single‐row array of the same length. The design also offers a substantially simpler and more robust alternative to the common double‐row loop array with about 10% higher SAR efficiency and better longitudinal coverage.