Workflow for computational fluid dynamics modeling of fixed‐bed reactors packed with metal foam pellets: Hydrodynamics-Reference-Cited by-同舟云学术

Workflow for computational fluid dynamics modeling of fixed‐bed reactors packed with metal foam pellets: Hydrodynamics

Published:2021-05-03 Issue: Volume: Page:
ISSN:0001-1541
Container-title:AIChE Journal
language:en
Short-container-title:AIChE J

Author:

George Ginu R.¹^ORCID,Bockelmann Marina²,Schmalhorst Leonhard³,Beton Didier³,Gerstle Alexandra³,Torkuhl Lars³,Lindermeir Andreas²,Wehinger Gregor D.¹^ORCID

Affiliation:

1. Institute of Chemical and Electrochemical Process Engineering Clausthal University of Technology Clausthal‐Zellerfeld Germany

2. CUTEC Research Centre Clausthal University of Technology Clausthal‐Zellerfeld Germany

3. Alantum Europe GmbH Munich Germany

Funder

Bundesministerium für Wirtschaft und Energie

Publisher

Wiley

Subject

General Chemical Engineering,Environmental Engineering,Biotechnology

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/aic.17284

Reference54 articles.

1. Manufacture, characterisation and application of cellular metals and metal foams;Banhart J;Prog Mater Sci,2001

2. Mass‐transfer characterization of metallic foams as supports for structured catalysts;Giani L;Ind Eng Chem Res,2005

3. Heat transfer in open‐cell metal foams;Lu TJ;Acta Mater,1998

4. A review on manufacturing and application of open‐cell metal foam;Kim S;Procedia Mater Sci,2014

5. A new class of high temperature and corrosion resistant nickel‐based open‐cell foams;Walther G;Adv Eng Mater,2008

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effects of scaling criteria on modelling of multi-phase flow in the packed bed using coarse grain CFD-DEM;Chemical Engineering Science;2024-08

2. An improved ghost cell Immersed Boundary Method for conjugate mass and heat transport in fluid-particle systems;Chemical Engineering Science;2024-06

3. Enhanced performance of packed bed methane dry reformers using metal foam catalyst pellets: A particle resolved CFD study;Chemical Engineering Science;2024-05

4. A 3D-printed CuNi alloy catalyst with a triply periodic minimal surface for the reverse water-gas shift reaction;Journal of Materials Chemistry A;2024

5. Effect of catalyst shapes on hydrogen production from exhaust gas-fuel reforming for NG engine: A mesoscale 3D simulation;Fuel;2023-09