Modification of nonwoven polymer materials for increasing of their filtration and antibacterial properties

Abstract

AbstractPolytetrafluoroethylene (PTFE), octenidine dihydrochloride (OCT), and zinc oxide (ZnO) were used to modify the polypropylene nonwoven material by the methods of “wet chemistry” and low‐energy electron beam deposition (EBD). The influence of nonwoven material modification on the morphology, chemical composition, filtration, and antibacterial properties was established. The modified material has antibacterial activity against the gram‐positive strain Staphylococcus aureus and against gram‐negative strains of Escherichia coli and Klebsiella pneumoniae (suppression of bacterial growth for materials with OCT was 100%, with ZnO—70%). PTFE application to Aquaspun leads to a significant increase in the contact angle (from 141.3° to 152.7°) and air filtration efficiency (from 78.3% to 83.4%), which provides the barrier properties of the material. It was established that the material obtained using low‐energy EBD demonstrated a more pronounced antimicrobial potential against the tested strains of St. aureus.Highlights The influence of polypropylene nonwoven materials surface modification methods is systematically investigated. Low‐energy electron beam deposition increases antibacterial and filtration properties of nonwoven materials. Surface modification methods increase barrier properties of polypropylene nonwoven materials.