Affiliation:
1. Institute of New Materials and Nanotechnologies National University of Science and Technology “MISIS” Moscow Russian Federation
Abstract
AbstractThe use of polylactic acid‐based composites as self‐fixing materials is a promising technology for various applications due to the shape memory effect of polylactide. In this study, hexagonal boron nitride (h‐BN) was mixed with polylactic acid (PLA) with concentrations of 0, 0.5, 1, 2, 5, and 10 wt% for subsequent film casting. The morphology, mechanical and thermal characteristics of the composite were investigated. With a high percentage of filler content, a decrease in thermal conductivity was observed. The recovery strain decreased with increasing the filler content. The amount of h‐BN had a mixed effect on the recovery stress of the composite. Thus, PLA/h‐BN composites represent a new research idea to study the influence of a heat‐conducting filler on a shape memory effect in polylactic acid.Highlights
Correlation between crystallinity, thermal and shape memory properties was described
Decrease in thermal conductivity was observed with the large percentage of filling
The composite with 2 wt% of h‐BN exhibits optimal characteristics of SME
Recovery strain decreased with the rise of filler content
Amount of h‐BN had a non‐trivial effect on the recovery stress of composite
Funder
Ministry of Science and Higher Education of the Russian Federation
National University of Science and Technology
Subject
Materials Chemistry,Polymers and Plastics,General Chemistry,Ceramics and Composites
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献