Affiliation:
1. Faculty of Chemistry University of Science, Vietnam National University Hanoi Vietnam
Abstract
AbstractThis study aimed to improve the anti‐fouling properties of a thin‐film composite polyamide membrane by modifying it with chitosan and acrylic acid using UV‐induced and Redox‐initiated graft polymerization methods. The modified membrane's separation performance was evaluated by measuring the flux and retention of sodium ions in water during filtration. The anti‐fouling capacities of the modified membranes were determined by measuring the maintained flux ratios and irreversible fouling factors during the 8‐h filtration of aqueous solutions of sodium chloride at different concentrations (1000 and 10,000 ppm). In addition, by evaluating the membrane's surface properties using various methods, including field emission scanning electron microscopy, attenuated total reflection – Fourier transform infrared spectroscopy, and water contact angle measurements, we have demonstrated the validity of the experimental results. Our results showed that the grafted membranes under UV irradiation or redox initiators had enhanced anti‐fouling properties while maintaining salt retention. The modified membranes fabricated by UV‐induced or Redox‐initiated technique had superior anti‐fouling capabilities, with irreversible fouling factors and maintained flux ratios of around 8% and 43%, respectively, after 8 h of filtration, compared to only 12% and 36% for the unmodified membrane. These findings suggest that the modified membranes have the potential for use in filtration systems to prevent the fouling phenomenon.