Three‐dimensional modelling and hemodynamic simulation of the closure of multiple entry tears in type B aortic dissection

Abstract

AbstractBackgroundStanford type B aortic dissection (TB‐AD) is a life‐threatening vascular condition with high rates of morbidity and mortality. Currently, thoracic endovascular aortic repair (TEVAR) is widely performed to treat TB‐AD, and some studies have analyzed the influence of stents on hemodynamics using computational fluid dynamics (CFD) models. However, the accuracy of TB‐AD simulation models are not satisfactory, they are often constructed as a regular ideal model. Furthermore, it is unclear which tear should be closed for the best treatment when there are multi entry tears.PurposeThe aims of this paper were to provide an assessment method for the selection of the surgical closure location for type B aortic dissection. Five 3D models of multiple entry tears in type B aortic dissection were produced using real patient computed tomography (CT) images to perform hemodynamic analyses of flow velocity streamlines, wall pressure, and wall shear stress.MethodsA Boolean operation was adopted to establish 3D models with multiple entry tears in type B aortic dissection based on patient‐specific CT images. The Mimics and Ansys plug‐in The Integrated Computer Engineering and Manufacturing code for Computational Fluid Dynamics (ICEM CFD) software were applied to mesh the 3D models. The flow velocity streamlines, wall pressures, and wall shear stresses were then analyzed in the finite element analysis software Fluent. Five 3D models were produced to compare the hemodynamic characteristics of different entry tear numbers, as well as the changes of different closure positions before and after closure.ResultsThe false lumen of the model with two entry tears had a higher wall pressure than that of model with multiple entry tears, which may tend to squeeze the true lumen and expand the false lumen. The load distribution of the vessel in the model with multiple entry tears had a more balanced flow velocity, and its wall pressure and shear stress were lower than that of model with two entry tears. For aortic dissection with two entry tears, the closure of the proximal entry tear was recommended, which helped to isolate and thrombose the false lumen, thereby improving the blood supply function of the true lumen. Because the postoperative vascular flow velocity and mechanical load performance of the vascular wall were still higher than those of normal blood vessels, the postoperative blood vessels remained pathological, and TEVAR did not restore the blood vessels to their original healthy state.ConclusionsType B aortic dissection with two entry tears tend to squeeze the true lumen and expand the false lumen, resulting in a new entry tear and deterioration into multiple entry type B aortic dissection. The model of the vessel with multiple entry tears had a more balanced distribution in flow velocity and a smaller wall pressure and shear stress than that of the vessel with two entry tears. The closure of the proximal entry tear was considered an ideal solution for type B aortic dissection with two entry tears.