Fatigue improvement of rib‐to‐deck welded joints using adhesively bonded steel patches ‐ LEFM‐based parametric study

Abstract

AbstractRib‐to‐deck welded joints in orthotropic steel decks of bridges are prone to develop fatigue cracks. Repairing such cracks allows for prolonging the life of the infrastructure, provided that structural safety is guaranteed. Among others, the repair technique of adhesively bonded steel patches is relatively simple and inexpensive. Moreover, it has the advantage that the original structure is not altered, e.g. as in the case of crack stop holes. This technique has been used in other details like the diaphragm of steel bridges. However, limited information is available when applied to rib‐to‐deck joints, which are the most common joint type in orthotropic steel decks. This study proposes two repair schemes using adhesively bonded steel patches for the rib‐to‐deck joints. A 3‐D finite element model which takes account of the crack size is established. Based on linear elastic fracture mechanics (LEFM), a parametric study is performed to investigate the effect of patch geometry and adhesive thickness on the performance of repair schemes.