Study on the structure of energy‐saving bend pipes in a decanter centrifuge

Abstract

AbstractDecanter centrifuges are widely used in solid–liquid separation, and saving their energy consumption is very important. In this paper, a bend pipe installed at the end of the decanter centrifuge was designed to save energy, and the effect of different structural parameters of the energy‐saving bend pipes on the outlet velocity and the reaction torque was investigated. The results revealed that the outlet velocity and the reaction torque were reduced with the increase in the number of pipes, outlet area, and pipe length. Increasing the radial position had little effect on the outlet velocity, but increased the reaction torque. Decreasing the outlet area and increasing the radial position both weaken the separation performance of the decanter centrifuge. The best separation performance and reaction torque effect were achieved in a suitable structure. Furthermore, the turbulent intensity was reduced from 143% to 135% in the new machine installed with bend pipes. The energy‐saving efficiency dropped with the increase of the rotational speed and the value was 13.1% under 2500 rpm. The separation performance of the new machine was similar to that of the original machine, and the dewatering speed was increased with the increase of the axial position.