Real‐time dielectric monitoring of isothermal polymerization of methyl cyanoacetate and diethylene glycol dimethacrylate

Abstract

AbstractDielectric spectroscopy (DS) was employed to monitor the isothermal polymerization processes of P(MCA‐DEGDMA) formed by the alternating copolymerization of methyl cyanoacetate (MCA) and diethylene glycol dimethacrylate (DEGDMA) at different temperatures in real time. P(MCA‐DEGDMA) is a polyether containing functional groups (O, CN, COOCH3) which can promote the transport of ions Li+, thereby having the potential to apply in polymer electrolytes. It is beneficial to investigate the effect of temperature and time on P(MCA‐DEGDMA) polymerization and choose a suitable synthesis strategy through dielectric monitoring. A time‐ and temperature‐dependent relaxation process induced by orientational polarization of the P(MCA‐DEGDMA) chain was observed over a frequency range from 10 kHz to 4 × 106 Hz. The time to reach polymerization equilibrium (tequ) and the dielectric conversion were determined through the time variations of the conductivity at low frequency (κl). The polymerization process shows the characteristic of “fast followed by slow,” and the tequ can be advanced by raising the polymerization temperature. In addition, by discussing the monitoring time dependence of relaxation time (τ) and permittivity (ε), it was concluded that the extent of polymerization (α) for P(MCA‐DEGDMA) at 40°C is the largest, and the optimal polymerization temperature is between 30 and 50°C. Furthermore, the free activation energy (ΔG), activation enthalpy (ΔH), and activation entropy (ΔS) of the relaxation process caused by the motion of the P(MCA‐DEGDMA) chain in three temperature ranges (10–20°C, 30–40°C, 50–60°C) were calculated by using Eyring's equation, from which the physical image of various structures and conformations of the P(MCA‐DEGDMA) chain during monitoring was proposed. Considering the effect of temperature on the generation and migration of free ions, and on the structure and conformation of the P(MCA‐DEGDMA) chain, some suggestions for the synthesis of P(MCA‐DEGDMA) are given: during the polymerization, the temperature is controlled at 10°C in the early stage and then gradually raised to 40°C, which may be beneficial to improving the extent of polymerization of P(MCA‐DEGDMA). Our work may be helpful to investigate the polymerization process of polyether obeying the same synthesis mechanism with P(MCA‐DEGDMA). It can be proven that DS is useful in detecting the inner information of the system changing over time through our work.