Affiliation:
1. Department of Mechanics of Biosystem Engineering Tarbiat Modares University Tehran Iran
Abstract
AbstractThe cooling and heating sector is responsible for the highest energy consumption in the building sector, comprising approximately 30% of the total. Extensive research has been conducted to address this issue and minimize energy consumption through the implementation of innovative technologies. Among these technologies, the passive earth‐air heat exchanger (EAHE) has proven highly effective in reducing energy usage in the cooling and heating sector. This research focused on optimizing U‐shaped EAHE systems and examined their functional and thermal‐fluidic parameters through numerical analysis. The simulation employed COMSOL Multiphysics software, and the results obtained were in excellent agreement with experimental data. The study investigated a base case, as well as five optimized cases with varying inlet velocities, to evaluate performance. The findings revealed that increasing the working fluid's inlet velocity led to a decrease in the system's thermal efficiency. However, at higher velocities, the economic parameters for energy production showed improvements. Specifically, the system generated a maximum energy output of 9132 W in the fifth case, operating at a velocity of 2 m/s. Additionally, the system achieved an impressive performance coefficient of approximately 5.13 in the same case, with an inlet velocity of 0.46 m/s. Notably, the lowest recorded output temperature of the system was 22°C at the specified inlet velocity.