Trilayer Polymer Electrolytes Enable Carbon‐Efficient CO2 to Multicarbon Product Conversion in Alkaline Electrolyzers

Abstract

AbstractThe electrochemical CO2 reduction reaction (CO2RR) is an appealing method for carbon utilization. Alkaline CO2 electrolyzers exhibit high CO2RR activity, low full‐cell voltages, and cost‐effectiveness. However, the issue of CO2 loss caused by (bi)carbonate formation leads to excessive energy consumption, rendering the process economically impractical. In this study, we propose a trilayer polymer electrolyte (TPE) comprising a perforated anion exchange membrane (PAEM) and a bipolar membrane (BPM) to facilitate alkaline CO2RR. This TPE enables the coexistence of high alkalinity near the catalyst surface and the H+ flux at the interface between the PAEM and the cation exchange layer (CEL) of the BPM, conditions favoring both CO2 reduction to multicarbon products and (bi)carbonate removal in KOH‐fed membrane electrode assembly (MEA) reactors. As a result, we achieve a Faradaic efficiency (FE) of approximately 46 % for C2H4, corresponding to a C2+ FE of 64 % at 260 mA cm−2, with a CO2‐to‐C2H4 single‐pass conversion (SPC) of approximately 32 % at 140 mA cm−2—nearly 1.3 times the limiting SPC in conventional AEM‐MEA electrolyzers. Furthermore, coupling CO2 reduction with formaldehyde oxidation reaction (FOR) in the TPE‐MEA electrolyzer reduces the full‐cell voltage to 2.3 V at 100 mA cm−2 without compromising the C2H4 FE.