Affiliation:
1. Institut Jean Lamour Université de Lorraine Nancy France
2. CTICM Saint‐Aubin France
3. Civil and Water Engineering Department, Laval University Québec Canada
Abstract
AbstractThis paper describes a parametric study addressing the resistance of U‐profiles (channel profiles) subject to bending and torsion to lateral torsional buckling. In case of U‐sections, the torsional moment results, in the majority of cases, from an unavoidable eccentricity of the applied load from the shear centre. The behavior and resistance of the studied members is addressed through a parametric study based on a numerical model validated with laboratory tests. This study is divided into two parts. First, U‐sections subject to bending only are studied in order to provide a method for this reference load case. In particular, the non symmetric stability behaviour of this type of section will be highlighted. Based on the numerical results an adaption of the European buckling curves is proposed. Then, the members are studied under combined bending and torsion. Existing design methods applicable to I sections are extended in order to account for the specific behaviour of U sections.
Subject
General Earth and Planetary Sciences,General Environmental Science
Reference17 articles.
1. A.Beyer A.Khelil N.Boissonnade andA.Bureau Strength of rolled U‐sections subjected to bending and torsion ‐ Part I: Laboratory tests and numerical model Rev. Constr. Métallique no.3 2021.
2. CEN EN 1993‐1‐1:Eurocode 3 ‐ Design of steel structures ‐ Part 1‐1: General rules and rules for buildings.2005.
3. Design rules for lateral torsional buckling of channel sections subject to web loading
4. R.KindmannandJ.Frickel ‘Tragfähigkeit von U‐Profilen bei Biegung und Torsion’ RU Bochum Bochum 1‐2002 2002.