Challenges of reliable AFM‐tip shape reconstruction and approximation

Abstract

AbstractReliable reconstruction of AFM tip geometry is not an easy task. The shape of the tip can be (partially) reconstructed from the AFM image of a calibration sample using a blind reconstruction method. The result is a range of the tip shapes (from unrealistically sharp to blunt). A criterion for selecting the true shape is proposed. It is based on reconstruction of the calibration relief. Further refining the probe geometry by indenting an elastic polymer is discussed. The choice of the test sample is another problem. In practice, the researcher has a small number of commercially available test gratings. Their limitations are highlighted. An approximation of tip geometry by a body of revolution is required in indentation experiments. A hyperboloid was found to be the closest approximation to the conventional probes. The contact area was obtained for the hyperboloids with different parameters indenting an elastic material.Research Highlights Criteria for blind reconstruction algorithm of AFM tip shape. Pros and cons of tip shape calibration samples. Contact area of the elastic indentation by hyperbolic indenter.