Felsmechanische Planung in der geotechnischen Werkzeugkiste von morgen: Eurocode 7 – Geotechnische Bauwerke: Böschungen, Flachgründungen und Stützkonstruktionen (EN 1997‐3:2024)

Abstract

AbstractThe second generation of Eurocode 7 includes both soil and rock. In addition to the current practice of ground engineering, this document aims at incorporating rock engineering, improving the ease of use, the harmonization of regulations and covering new developments. This paper provides an overview of some of the significant changes to Eurocode 7 in rock engineering design, taking into consideration limit state design, robustness, durability, and reliability. It focuses on the design of slopes, spread foundations, and retaining structures.The clauses focus on soil mechanics, but also include special rock mechanical issues such as the influence of discontinuities and strength anisotropy on the limit states. Many matters associated to verification of rock mechanical design are linked to the use of prescriptive rules and shall be given in National Annexes. For geotechnical structures in rock, it is mentioned that geotechnical mapping and documentation is important to verify the limit states. However, the basic issues with partial factor methods for verification of the ground‐structure interaction of reinforced slopes and retaining structures are not fully resolved. This has caused some difficulties in setting up partial factors and obtaining a sufficient overview of the application of partial factor method, especially in rock engineering.The design of slopes, spread foundations and retaining structures must likewise consider other clauses in the Eurocode. Rock support for slopes and retaining structures is described in Clause 13 ”Rock Bolts and Surface Support“. Groundwater‐related issues are described in clause 12 ”Ground water control“ which influence the design and limit states for the actual geotechnical structure. Dams and levees are featured in Clause 4 ”Slopes, Cuttings and Embankments“.