Machine Learning Aided Optimization of P1 Laser Scribing Process on Indium Tin Oxide Substrates

Abstract

Present study employes a picosecond laser (532 nm) for selective P1 laser scribing on the indium tin oxide (ITO) layer and subsequent fine‐tuning of P1 scribing conditions with machine learning (ML) techniques. Initially, the scribing is performed by varying different laser parameters and further evaluate them via an optical microscope and two probe resistivity measurements. The corresponding scribing width and sheet resistance data are used as input databases for ML analysis. The classification and regression tree (CART)‐based ML analysis revealed that median pulse energy <5.7 μJ insufficient to separate the adjacent scribing regions. While pulse energy >5.7 μJ, APL > 35%, LSO > 46%, and processing speed ≥1250 mm s−1 gives ≥16 μm of scribing width. Further, the decision tree (DT) analysis showed that pulse energy of ≥8.1 μJ, and LSO ≥ 37% are required for electrically isolated lines. The feature importance score suggests that laser fluence and pulse energy determined the scribing width, whereas electrical isolation strongly depends on LSO and processing speed. Finally, the ML achieved conditions experimentally validated and reassessed via scanning electron microscope, and atomic force microscopy aligns well with optical microscope measurements.