Affiliation:
1. Faculty of Engineering Teerthanker Mahaveer University Moradabad India
2. Civil Engineering Norwegian University of Science and Technology Trondheim Norway
Abstract
AbstractThe present paper highlight upon research work is that curing is one of most important aspect of construction. The life of concrete and its serviceability depends heavily on curing. The method of curing applied on concrete will affect its final strength and durability. Owing to this fact this paper contains the research done on concrete under various curing methods. The standard method of curing concrete is done by water and results wastage of a lot of water. With the increase in the deficiency of availability of water, curing becomes a problem. Hence this research aims at providing better methods of curing which will not only improve the strength and durability of concrete but will also save water. The various methods that have been researched upon are plastic covered curing, addition of sodium silicate to curing water, and addition of curing compounds to curing water. The tests are carried on concrete with desirable strengths of M15 and M20. In this research the fine aggregate used in making of M15 and M20 concrete consists of a mixture of sand and crusher dust. Two mixes of ratio 50:50 and 60:40, sand to crusher dust have been taken and the effects of curing on these mixes are considered. Plastic curing is done by covering the concrete with plastic soon after demolding. Hence minimum water is required. The curing done by sodium silicate is done by adding 2% by weight of sodium silicate to curing water. Concrete is submerged in water containing sodium silicate. Once the concrete is cured, this water mix can be reused to cure freshly cast concrete, thereby saving more water. Curing by curing compounds is done in a similar way as that of curing with sodium silicate, only that instead of sodium silicate, curing compounds are used. The effect of these three methods on concrete is studied and discussions are made.