Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process

Abstract

AbstractFused deposition modeling (FDM) is an additive manufacturing process that can be used to manufacture three‐dimensional thermoplastic components layer by layer. One disadvantage of FDM is the shrinkage of the components during the manufacturing process. The filament is molten in the nozzle, deposited layer by layer, and cools down again. During solidification, the filament shrinks inhomogeneously in the x/y/z direction, which leads to distortion of the component geometries. Particularly with higher nominal lengths and complex local geometries, there is a need for optimization with regard to dimensional accuracy. The aim of this paper is to counteract this on the software side with global as well as local shrinkage factors. The expected shrinkage within a layer is predicted with an in‐house developed software. The geometric accuracy of the model is verified by experimental investigations on cylindrical test specimens. In these, the so‐called clover effect occurs as a result of the shrinkage. The circular shape of the deposited layer is deformed by the distortion in the x–y plane comparable to a clover. Finally, the results are validated by analyzing a demonstrator in the form of a bracket.