Affiliation:
1. Centre for Advanced Composite Materials (CACM) Universiti Teknologi Malaysia Johor Bahru Malaysia
2. Faculty of Mechanical Engineering Universiti Teknologi Malaysia Johor Bahru Malaysia
Abstract
AbstractCarbon composites are susceptible to invisible damage development such as matrix cracking, fiber kinking, and interfacial debonding upon external transverse loading. These incipient damages may interact to evolve into life‐limiting delamination propagating both in in‐plane and transverse directions. This study addressed that by interleaving carbon/epoxy composites with electrospun nylon 6 nanofibers adopting a double infusion method. Damage resistance results showed that the optimum nanofiber areal weight (17.35 g/m2) offered a 27% improvement in specific total toughness. The emergence of pseudo‐ductility substantially enhanced the plastic toughness (46.15%) of interleaved composites. The load required for initial matrix cracking was 65.49% higher, and number of matrix cracking events was suppressed by 84.11% at the optimum areal weight of interleave. Fractography revealed frequent interlaminar crossings and delamination crack bridging as two major toughness mechanisms. Both the external damage area and delaminated area increased with increment in nanofiber areal weight.Highlights
Electrospun nanofibre interleaved carbon/epoxy composites were fabricated through a double infusion method to characterize damage resistance.
Acoustic data of matrix cracking was rationalized to show the effectiveness of nanofiber interleaves in suppressing this damage type.
Microstructural factors and mechanisms contributing to the improved toughness of optimally interleaved composites were identified.
External damage/delaminated areas of interleaved composites were correlated with nanofiber areal weights.
Subject
Materials Chemistry,Polymers and Plastics,General Chemistry,Ceramics and Composites