Fabrication of pressure visual fiber based on liquid metal control thermochromic pigments

Abstract

AbstractIn this study, pressure visual fibers (PVF) with a core‐shell structure were prepared using a coaxial wet spinning process. The fiber composite shell consists of a luminescent material (as a light source) and a thermochromic pigment (as a filter light source) mixed with a polyacrylonitrile (PAN) matrix. The fiber core layer, on the other hand, was made of gallium‐indium alloy liquid metal. In operation, the filter light source is activated by joule heat drive (resulting in the fading of the thermochromic pigment), and the PVF releases phosphorescence upon exposure to ultraviolet light. When a certain pressure is applied to the fiber shell, the liquid metal in the core layer is squeezed, resulting in a local cross‐sectional area reduction, an increase in local joule thermal power, and thus local discoloration. This localized compression, in combination with a small rated current and the presence of an ultraviolet light source, converts the mechanical force (strain and compression) into an optical response. The excellent electrical conductivity of the liquid metal, combined with its compatibility with the soft matrix, makes it a promising candidate for applications in smart textiles and flexible sensing.Highlights The technology of visual fiber controlled by current is presented. The bendability and controllability of visual composites are improved. The composite fiber can be visualized when stressed.