Affiliation:
1. School of Chemistry and Materials Engineering Beijing Technology and Business University Beijing People's Republic of China
2. Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics Beijing Technology and Business University Beijing People's Republic of China
3. Department of Biotechnology Central University of South Bihar Gaya India
Abstract
AbstractMelt extrusion process was followed in order to improve the high crystallinity and poor toughness of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) blend materials. It was achieved by the incorporation of epoxy‐terminated hyperbranched polyester (EHBP) elastomer into PHBV and polycaprolactone (PCL). EHBP cross‐links PHBV and PCL through ring‐opening polymerization of epoxy‐terminated and carboxyl groups. The mass percentages of EHBP in the PHBV/PCL blends are 1, 2, 3, and 4mass%, which are expressed as 1, 2, 3, and 4 phr in the following text. Therefore, when the EHBP content was 3 phr, the Young's modulus and tensile strength of the blends are increased to 750 and 15 MPa, respectively, which was comparable to the biodegradable polymers used for packaging. Simultaneously, compatibility between PHBV and PCL has been improved and the particle size reduction of blends can be obviously observed in scanning electron microscope (SEM) images. Dynamic mechanical analysis (DMA) analysis revealed that PHBV and PCL showed improved compatibility with each other by the addition of EHBP. Differential scanning calorimetry (DSC) revealed that the decrease of crystallinity of the blend was consistent with the increase in mechanical properties. Additionally, all the bio‐blends show good thermal stability. Food overall migration studies showed that the amount of migration of composite materials in contact with food was also far lower than the national standard value. Therefore, PHBV/PCL/EHBP blends are expected to be used in the field of food packaging.
Funder
National Natural Science Foundation of China