Affiliation:
1. Electrical Engineering Department National Institute of Technology Silchar India
Abstract
SummaryGenerating a quadrature signal in a single‐phase system using a second‐order generalized integrator (SOGI) requires accurate frequency information. The standard SOGI phase‐locked loop (PLL) includes frequency feedback to the SOGI. However, during grid abnormalities such as voltage sag/swell and phase angle jumps, the SOGI‐PLL faces frequency disturbances that propagate to the phase detector (PD) and affects the quadrature signal generator (QSG). Furthermore, the SOGI‐PLL having two loops dependent on each other creates loop coupling phenomena; either a change in phase or frequency affects each other. SOGI‐PLL is tuning sensitive, as the SOGI block has a gain that needs to be adjusted, increases the complexity, and affects the performance of the system. There is a trade‐off between SOGI gain and PLL parameters that needs to be considered for adequate parameter design to provide accurate grid synchronization while maintaining the stability of the system. To attain better performance, researchers have proposed derivative‐based PLL (DPLL). The conventional DPLL faces challenges to noise and harmonics amplification. This paper presents an improved DPLL for single‐phase grid synchronization under adverse grid conditions. The improved derivative‐based PLL (IDPLL) comprises two improved derivative‐based quadrature signal generator (IDQSG) blocks to extract the phase‐error information for accurately estimating phase and frequency. The detailed mathematical modeling and bode plot for the IDQSG and IDPLL are presented. The proposed IDQSG eliminates the requirement of gain tuning, hence reducing complexity. Moreover, there is no interdependent loop in the IDPLL, which significantly improves the dynamic performance. A hardware setup is developed to evaluate the performance of the system in real‐time. The experimental results are obtained using an field programmable gate array (FPGA)‐based controller.