Affiliation:
1. Mechanical Engineering Department Faculty of Engineering Suez University Suez 41522 Egypt
2. Energy Resources Engineering Department Egypt‐Japan University of Science and Technology (E‐JUST) Borg Elarab‐Alexandria EJUST Alexandria 21934 Egypt
3. Mechanical Power Engineering Department Faculty of Engineering Assiut University Assiut 71515 Egypt
Abstract
Energy and exergy performance of simple vapor compression refrigeration unit is investigated experimentally with and without coupling heat exchanger of phase change material before the condenser. The hot outside air is cooled before entering the condenser throughout the day by flowing over the cooled phase change material structure that previously solidified during nighttime. Phase change material SP24 is employed because its melting/freezing range is suitable for most selected countries' climates. An experimental set‐up of an air‐phase change material heat exchanger coupled with the unit is constructed to examine its performance, including pressure–enthalpy curve, coefficient of performance, exergy performance, and power consumption including inflow air temperatures and flow rates impacts. Results affirm that the coefficient of performance, cooling capacity, power usage, and exergy destruction are improved by using phase change material. Compared to the unmodified unit, the maximum percentage of saved power and exergy destruction enhancement for the modified refrigeration unit with phase change material is about 8.8% and 10%, respectively. The maximum coefficient of performance and exergy efficiency rise is about 15.1% and 14.2%, respectively. Increasing the temperature differential across the phase change material heat exchanger, either by increasing inlet temperature or decreasing airflow, enhances the refrigeration unit power saving.