Affiliation:
1. College of Mechanical Engineering Quzhou University Quzhou China
2. College of Mechanical Engineering Zhejiang University of Technology Hangzhou China
3. College of Information Engineering Quzhou College of Technology Quzhou China
4. The Zhejiang Provincial Key Lab of Fluid Transmission Technology Zhejiang Sci‐Tech University Hangzhou China
Abstract
AbstractTo understand the self‐priming characteristics of a self‐priming pump, a closed‐loop piping system that includes the self‐priming pump, valve, tank, and piping system is established. The acceleration–constant speed operation processes of the impeller are controlled through a user‐defined function that ensures that the computational model and startup conditions are consistent with the real situation. Based on numerical calculations of the self‐priming process with two different self‐priming heights, the gas–liquid distributions during the self‐priming startup process are obtained. The results show that the self‐priming startup process can be divided into three stages: rapid inhalation, oscillating exhaust, and accelerated exhaust. Under the two self‐priming heights, the time required for the rapid inhalation and accelerated exhaust stages is basically the same. Thus, the difference in self‐priming time is mainly concentrated in the oscillating exhaust stage. The rate at which the liquid level rises in the vertical pipe is not proportional to the self‐priming height, and the difference in the self‐priming time is not proportional to the change in the self‐priming height.