A new nanocomposite based on polylactic acid/butadiene rubber/clay: Morphology development and mechanical properties

Abstract

AbstractIn this work, several samples based on poly(lactic) acid (PLA)/butadiene rubber (BR) blend with and without nanoclay (Cloisite 30B) were prepared using an internal mixer. Various methods were used to characterize the samples, including scanning electron microscopy (SEM), atomic force microscopy (AFM), x‐ray diffraction (XRD), rheometric mechanical spectrometer, stress–strain, and impact strength tests. The SEM results showed the droplet‐matrix morphology for all prepared samples. With the incorporation of nanoclay, the mean diameter of the BR droplets generated within the PLA matrix decreased. AFM test revealed the placement of nanoparticles in the PLA phase, which was consistent with the thermodynamic prediction of their location. The XRD test showed that the interlayer space of nanoclay expanded by 86% due to the diffusion of polymer chains between them. In the rheology test, this resulted in an increment in modulus and viscosity at low frequencies for the nanocomposites compared to the simple blend. The highest elongation at break was observed for the PLA/BR blend containing 10 wt% BR with approximately 40 times its value for the neat PLA, while the impact resistance increased up to three times.