Improved Stability of Single‐Crystal LiCoO2 Cathodes at 4.8 V through Solvation Structure Regulation

Abstract

AbstractIncreasing the charging cut‐off voltage can significantly improve the capacity of LiCoO2 cathode. However, when the cut‐off voltage exceeds 4.5 V (vs Li/Li+), LiCoO2 undergoes irreversible phase transitions, leading to particle cracking and structural failure. Additionally, the decomposition of the electrolyte compromises the stability of the cathode/electrolyte interface, resulting in diminished battery capacity. Herein, the elements Al, Mg, and Zr are doped into single‐crystal LiCoO2 to enhance the structural stability of LiCoO2. Moreover, a 3 Å zeolite film is used to regulate the solvation structure to enhance the oxidation resistance of the electrolyte. This design enables a more stable cathode/electrolyte interface during high‐voltage cycling. At a cut‐off voltage of 4.8 V, the Li||LiCoO2 battery exhibits an initial discharge capacity of 236.2 mAh g−1 at 0.1 C and maintains 86.6% capacity retention after 100 cycles at 1 C. The pouch full cell, which utilizes a graphite anode and LiCoO2 cathode, operating within a charge–discharge range of 2.8–4.65 V, achieves a specific energy of 276 Wh kg−1 with 81% capacity retention after 200 cycles. This work introduces a desolvated electrolyte into the LiCoO2 battery system, providing a professional approach to addressing the challenges of high‐voltage LiCoO2.