Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Abstract

AbstractAntimony sulfide (Sb2S3) has attracted extensive attention due to its excellent photoelectric characteristics, including a high absorption coefficient (α > 104 cm−1) and a suitable bandgap (≈1.7 eV). However, due to its Q1D (quasi‐1D) structure, numerous deep‐level defects are identified in the Sb2S3 film, limiting the device's performance, and necessitating more efforts to overcome this situation. In this context, an ethanol solvent‐assisted chemical bath deposition (S‐CBD) strategy, a novel high‐quality thin film manufacturing technique is presented that modifies the supersaturation of the precursor solution by varying the boiling point and solvent polarity. This approach enables the effective regulation of the correlation between the crystal nucleation and growth rates, resulting in Sb2S3 films with large grains (≈4.25 µm, 37.5% ethanol), excellent crystallinity, well‐oriented structures (TC(211)/TC(020) = 2.39), low defect density, and prolonged carrier lifetimes (τAve ≈ 12.1 ns). Consequently, the final Sb2S3‐based solar device (FTO/CdS/Sb2S3/Spiro‐OMeTAD/Au) shows significant improvements in both FF (61.63%) and JSC (17.61 mA cm−2), yielding an excellent power conversion efficiency (PCE) of 7.84%. This research gives particular insights into the growth mechanism of high‐quality Sb2S3 thin films by CBD method as well as a potential route for enhancing Sb2S3 solar cell performance.