Improving the Defect Tolerance of PBF‐LB/M Processed 316L Steel by Increasing the Nitrogen Content-Reference-Cited by-同舟云学术

Improving the Defect Tolerance of PBF‐LB/M Processed 316L Steel by Increasing the Nitrogen Content

Published:2022-08-02 Issue:1 Volume:25 Page:2200751
ISSN:1438-1656
Container-title:Advanced Engineering Materials
language:en
Short-container-title:Adv Eng Mater

Author:

Stern Felix¹^ORCID,Becker Louis²^ORCID,Cui Chengsong³^ORCID,Tenkamp Jochen¹^ORCID,Uhlenwinkel Volker³^ORCID,Steinbacher Matthias³^ORCID,Boes Johannes²^ORCID,Lentz Jonathan²^ORCID,Fechte-Heinen Rainer³^ORCID,Weber Sebastian²^ORCID,Walther Frank¹^ORCID

Affiliation:

1. Chair of Materials Test Engineering (WPT) TU Dortmund University 44227 Dortmund Germany

2. Chair for Materials Technology (LWT) Ruhr University Bochum 44801 Bochum Germany

3. Materials Engineering Department Leibniz Institute for Materials Engineering-IWT 28359 Bremen Germany

Funder

Deutsche Forschungsgemeinschaft

Publisher

Wiley

Subject

Condensed Matter Physics,General Materials Science

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200751

Reference45 articles.

1. Fatigue characteristics of steels manufactured by selective laser melting

2. The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components

3. Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material

4. Additively manufactured hierarchical stainless steels with high strength and ductility

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Creep-fatigue properties and deformation mechanism of 316L steel fabricated by laser powder bed fusion (PBF-LB/M);Materials Science and Engineering: A;2024-09

2. Fatigue performance in additively manufactured metal alloys;Progress in Additive Manufacturing;2024-08-01

3. Additive manufacturing of high nitrogen austenitic steel using shell-core strategy;Additive Manufacturing Letters;2024-04

4. Moisture Effects on Qualities and Properties of Laser Powder Bed Fusion (LPBF) Additive Manufacturing of As-Built 17-4PH Stainless Steel Parts;Metals;2023-09-03

5. Influence of nitrogen content on the corrosion fatigue behavior of additively manufactured AISI 316L stainless steel in chloride solution;International Journal of Fatigue;2023-07