Atomic Force Microscopy Investigation of the In Situ‐Formed Oxide Layer at the Interface of Al 2 O 3 −C/Steel Melt in Terms of Adhesion Force and Roughness in a Model System-Reference-Cited by-同舟云学术

Atomic Force Microscopy Investigation of the In Situ‐Formed Oxide Layer at the Interface of Al 2 O 3 −C/Steel Melt in Terms of Adhesion Force and Roughness in a Model System

Published:2021-11-20 Issue: Volume: Page:2100634
ISSN:1438-1656
Container-title:Advanced Engineering Materials
language:en
Short-container-title:Adv Eng Mater

Author:

Ditscherlein Lisa¹^ORCID,Zienert Tilo²,Dudczig Steffen²,Aneziris Christos²,Peuker Urs Alexander¹

Affiliation:

1. Institute of Mechanical Process Engineering and Mineral Processing Agricolastraße 1 09599 Freiberg Germany

2. Institute of Ceramics, Refractories and Composite Materials Agricolastraße 17 09599 Freiberg Germany

Funder

Deutsche Forschungsgemeinschaft

Publisher

Wiley

Subject

Condensed Matter Physics,General Materials Science

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202100634

Reference39 articles.

1. Reactive Filters for Steel Melt Filtration

2. Functionalized Carbon-Bonded Filters with an Open Porous Alumina Coating: Impact of Time on Interactions and Steel Cleanliness

3. Functional Coatings on Carbon-Bonded Ceramic Foam Filters for Steel Melt Filtration

4. Chemical Interactions of Alumina–Carbon Refractories with Molten Steel at 1823 K (1550 °C): Implications for Refractory Degradation and Steel Quality

5. Interface reactions between liquid iron and alumina–carbon refractory filter materials

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Open-cell ceramic foam filters for melt filtration: Processing, characterization, improvement and application;Journal of Materials Research and Technology;2024-09

2. Mechanical and Electrical Comparative Studies of Widely Utilized Solar Perovskite Thin Films via Scanning Probe Microscopy;ACS Applied Energy Materials;2024-04-03

3. Metal Melt Filtration in a Water-Based Model System Using a Semi-automated Pilot Plant: Experimental Methods, Influencing Factors, Models;Springer Series in Materials Science;2024

4. A New Approach for Sintering Simulation of Irregularly Shaped Powder Particles—Part II: Statistical Powder Modeling;Advanced Engineering Materials;2022-06

5. Coarse‐Grained Refractory Composite Castables Based on Alumina and Niobium;Advanced Engineering Materials;2022-05-14