From hybrid fibers to microfibers: The characteristics of polyamide 6/polypropylene blend via one‐step twin‐screw melt extrusion-Reference-Cited by-同舟云学术

From hybrid fibers to microfibers: The characteristics of polyamide 6/polypropylene blend via one‐step twin‐screw melt extrusion

Published:2020-04 Issue:4 Volume:60 Page:690-699
ISSN:0032-3888
Container-title:Polymer Engineering & Science
language:en
Short-container-title:Polym Eng Sci

Author:

Kunchimon Siti Zaharah¹²^ORCID,Tausif Muhammad²,Goswami Parikshit³,Cheung Vien²

Affiliation:

1. Department of Mechanical Engineering, Faculty of Engineering TechnologyUniversiti Tun Hussein Onn Malaysia 84600 Pagoh, Muar Johor Malaysia

2. School of DesignUniversity of Leeds Leeds LS2 9JT UK

3. Technical Textiles Research Centre, School of Applied ScienceUniversity of Huddersfield Huddersfield HD1 3DH UK

Funder

Universiti Tun Hussein Onn Malaysia

Ministry of Education

Publisher

Wiley

Subject

Materials Chemistry,Polymers and Plastics,General Chemistry,Materials Chemistry,Polymers and Plastics,General Chemistry

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/pen.25327

Reference37 articles.

1. Polypropylene/polyamide-6 blends: influence of compatibilizing agent on interface domains

2. Ellen MacArthur Foundation. A New Textiles Economy: Redesigning Fashion's Future.https://www.ellenmacarthurfoundation.org/publications. Published 2017. Accessed August 20 2018.

3. Blending PP with PA6 industrial wastes: Effect of the composition and the compatibilization

4. Investigation of tensile properties and dyeing behavior of various polypropylene/amine modifier blends

5. Dynamic rheological behavior of reactively compatibilized polypropylene/polyamide 6 blending melts

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Mechanism and properties of Super-Toughened ternary blends with unique ‘Tassel-Bundle’ morphology;Composites Part A: Applied Science and Manufacturing;2024-06

2. Predicting the Processability of Polymers in a Twin-Screw Extruder: CFD Simulation and Experimental Validation;Industrial & Engineering Chemistry Research;2024-05-21

3. Macromolecular Insights into the Altered Mechanical Deformation Mechanisms of Non-Polyolefin Contaminated Polyolefins;Polymers;2022-01-07

4. Effect of Melting–Recycling Cycles and Mechanical Fracture on the Thermoplastic Materials Composed of Thermoplastic Polyurethane and Polypropylene Waste Blends;Applied Sciences;2020-08-22

5. Compatibilization of immiscible blends of polypropylene and isosorbide containing copolyester with silica nanoparticles;Polymer Engineering & Science;2020-04-08