A method to enhance the accuracy of radio frequency power measurements in particle accelerator high‐frequency systems

Abstract

AbstractThis letter presents a method for accurately calculating radio frequency (RF) power in a standing wave transmission line system. The proposed approach utilizes two directional couplers in conjunction with a low‐level radio frequency control system. RF power is determined through the application of proposed equations derived from amplitude and phase measurements of coupling signals obtained from the two directional couplers. Experimental validation of the method is conducted using two directional couplers with directivities of 26 and 28 dB, respectively, operating at 162.5 MHz across the entire wavelength. Results indicate that employing a single directional coupler yields average power errors of approximately 6.6% and 5.8%, respectively. However, by implementing the proposed method, the measurement error can be reduced to approximately 1.0%.