Compressive response of PMMA microcellular foams at low and high strain rates-Reference-Cited by-同舟云学术

Compressive response of PMMA microcellular foams at low and high strain rates

Published:2017-12-01 Issue:13 Volume:135 Page:46044
ISSN:0021-8995
Container-title:Journal of Applied Polymer Science
language:en
Short-container-title:J. Appl. Polym. Sci.

Author:

Zhang Ruizhi¹,Zhang Lianmeng¹,Zhang Jian¹^ORCID,Luo Guoqiang¹,Xiao Dawu²,Song Zhenfei³,Li Meijuan⁴,Xiong Yuanlu¹,Shen Qiang¹

Affiliation:

1. State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology; Wuhan 430070 People's Republic of China

2. Institute of Materials; China Academy of Engineering Physics; Mianyang 621900 People's Republic of China

3. Institute of Fluid Physics; China Academy of Engineering Physics; Mianyang 621900 People's Republic of China

4. School of Chemistry, Chemical Engineering and Life Sciences; Wuhan University of Technology; Wuhan 430070 People's Republic of China

Funder

National Natural Science Foundation of China

111 Project

the Joint Fund

Nature Science Foundation of Hubei Province

Publisher

Wiley

Subject

Materials Chemistry,Polymers and Plastics,Surfaces, Coatings and Films,General Chemistry

Reference38 articles.

1. Gibson , L. J. Ashby , M. F. Cellular Solids: Structure and Properties 1997

2. Polypropylene foam behaviour under dynamic loadings: Strain rate, density and microstructure effects

3. Structural Materials and Processes in Transportation

4. Effect of density, microstructure, and strain rate on compression behavior of polymeric foams

5. Microstructure and mechanical properties of microcellular injection molded polyamide-6 nanocomposites

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. 4D printing of cellular silicones with negative stiffness effect for enhanced energy absorption and impact protection;Composites Part B: Engineering;2024-08

2. Experimental and phenomenological investigations on the strain rate sensitivity of rigid PVC foams at strain rates of 0.005 s−1 to 600 s−1;European Journal of Mechanics - A/Solids;2024-03

3. Influence of specimen profile size and thickness on the dynamic compressive behavior of rigid PVC foams;International Journal of Impact Engineering;2023-09

4. Compressive behavior and deformation mechanisms of rigid polymeric foams: A review;Composites Part B: Engineering;2023-03

5. Bioinspired Multifunctional Cellular Plastics with a Negative Poisson’s Ratio for High Energy Dissipation;Advanced Materials;2020-07-09