Affiliation:
1. Department of Aeronautical Engineering Jordan University of Science and Technology Irbid Jordan
2. Mechanical Engineering Department, IRC‐Sustainable Energy Systems Interdisciplinary Research Center for Industrial Nuclear Energy (IRC‐INE) King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia
Abstract
AbstractIn this work, the transfer of heat and changes in fluid pressure within a rectangular channel fairly packed with porous material have been studied numerically for various Darcy numbers and dimensionless porous layers. The model was run with the following assumptions: laminar flow, forced convection, isotropic porous material, local thermodynamic equilibrium, constant wall temperature boundary condition, and no thermal dissipation. The study covers a broad range for the dimensionless porous layer, 0 ≤ hr < 1, and the Darcy number, 10−4 < Da < 10−2. The fully developed and developing flow over the channel is investigated in numerical study. It was observed that the inertia effect may be disregarded when Da < 10−4. The local dimensionless bulk temperature distribution, pressure drop, and velocity profiles were all shown to be impacted by the Darcy number and dimensionless porous layers, according to the numerical analysis results. The maximum heat transfer rate was attained when the ratio of the porous layer inside the channel was 0.8, and the pressure gradient was the highest. Partial packing of the channel with a porous material has two advantages: it increases the rate heat transmission rate and results in a much smaller pressure drop than a filled porous medium.