Affiliation:
1. Department of Chemical and Biomolecular Engineering University of California, Berkeley Berkeley, California 94720 USA
2. Catalysis Research BASF SE Ludwigshafen, Rhineland-Palatinate 67059 Germany
3. California Research Alliance BASF Corporation Berkeley, California 94720 USA
4. Charles D. Davidson School of Chemical Engineering Purdue University West Lafayette, Indiana 47907 USA
Abstract
AbstractC2H4−O2 reactions form ethylene oxide (EO) on Ag nanoparticles dispersed on α‐Al2O3 and promoted with alkali and other elements, with Re and Cs most frequently used in practice. Traces of alkyl chlorides (e. g., C2H5Cl) and alkanes in much larger amounts are added to reactants to balance the rate of deposition and removal (and the coverage) of Cl adatoms (Cl*) on Ag surfaces. Such Cl adlayers retain Ag surface ensembles that form O2‐derived intermediates that favor EO synthesis, but typically decrease O2 activation rates. A series of Ag/α‐Al2O3 catalysts (with and without Re or Cs) are used here to examine the role of promoters and Cl moderators through an analysis of the effects of reaction conditions and C2H5Cl levels using convection‐reaction constructs and a mechanistic formalism that considers O2 (as chemisorbed O2*) as the reactant in EO synthesis through one electrophilic O‐atom, with the second O‐atom (O*) acting as a unselective nucleophile that must be scavenged by a sacrificial reductant (C2H4 or EO); such channels are precluded by any intervening O2 dissociation events (that form two O*). O2 consumption rates in C2H4−O2 reactions decrease 10‐fold upon exposing Ag/α‐Al2O3 to C2H5Cl, evincing persistent Cl* species that block active sites and require >104 C2H4 oxidation turnovers to be removed. Activation barriers do not change but relative rates of epoxidation versus combustion increase in the presence of this refractory Cl* adlayer, which reduces the number and shrinks the size of available site ensembles without altering their intrinsic reactivity for O2 activation to form O2* but attenuating rates of its subsequent dissociation. Refractory O* adlayers also form on Ag surfaces, as shown by the accumulation of persistent O* species upon exposing reduced Ag particles to N2O. Inter‐atom repulsive forces weaken O* binding and destabilize N2O decomposition transition states to eventually allow stable N2 and O2 evolution for catalytic N2O decomposition, which occurs at landing ensembles formed at interstices of refractory adlayers. Cl* forms denser adlayers than O*, as evidenced by a 10‐fold decrease not only to C2H4−O2 rates but also to N2O stoichiometric and catalytic rates and O* uptakes. The occasional evolution of O2, which forms larger landing ensembles that more readily form 2O* from O2, occurs with higher frequency from O* than mixed O*/Cl* adlayers, and this effect of Cl* to inhibit (O−O)* dissociation is demonstrated in CO probe reaction studies, which show that highly reactive bound dioxygen species are retained to a greater extent when adlayers comprise both Cl* and O*. Re and Cs do not influence the nature of such adlayers but increase and decrease, respectively, the number of acid sites and selectivity losses via EO combustion. Their respective domains may also block a modest fraction of Ag surfaces without consequences on intrinsic O2 activation rates or EO selectivities. The effects of Re beyond those reported here may emerge upon synthetic protocols that alter Re location and Ag−Re intimacy to enable channels which utilize both O‐atoms in epoxidation.
Subject
Inorganic Chemistry,Organic Chemistry,Physical and Theoretical Chemistry,Catalysis