Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

Abstract

AbstractThe microstructure and properties of an AlSi10Mg alloy produced by selective laser melting were examined using optical microscopes, scanning electron microscopes, electron backscattered diffraction, and x‐ray diffraction. The results show that the mechanical characteristics of selective laser melting formed AlSi10Mg alloy is superior to those of traditional sand cast AlSi10Mg alloy due to fine grain strengthening and solid solution strengthening. AlSi10Mg alloy formed by selective laser melting is mainly composed of α‐aluminum solid solution, eutectic silicon with network structure and a small amount of Magnesium silicon precipitated phase, and different cross‐sections have unique microstructures and properties. The XOY plane is composed primarily of equiaxed grains with an average grain size of 7.34 μm and a {001} <100> cubic texture, and it has a hardness value of 130.7 HV 0.2. The majority of the YOZ plane, which has a {111}<110> brass R texture and a hardness value of 108.9 HV 0.2, comprises columnar crystals with an average grain size of 8.42 μm.