Affiliation:
1. Japan Aerospace Exploration Agency Tsukuba Japan
Abstract
AbstractWe propose the novel magnetic compensation method which is suitable to compensate gradient magnetic fields. The method is to be applied to a conventional large‐scale, tri‐axial active magnetic shielding system such as a spacecraft magnetic testing facility. The essences of this method are the adoption of compensation coils which have degrees of freedom in their coil orientations, and their installation position, which is chosen to have certain distances from the center of the shielding area. The method works with at least four compensation coils. In this research, we actually demonstrated the method with a scaled‐down experiment. Disturbance magnetic field (B) at the target zone was suppressed from 21.33 nT to −1.54 nT and magnetic field uniformity (ΔB) within the test zone was improved from 2.3 nT to 0.015 nT. In terms of magnetic field gradient, improvement from over 4 nT/m to below 0.5 nT/m was achieved.
Subject
Electrical and Electronic Engineering,Energy Engineering and Power Technology
Reference10 articles.
1. BonoJT PurpuraJW.Theory behind coil‐geometry parameters for fanselau/braunbeck magnet coils. Technical Report NSWC PCD TR‐2017/009;2017.
2. Shielding Effect of Panel Type Active Magnetic Compensation
3. Active Magnetic Shielding Using Symmetric Magnetic Field Sensor Method
4. BorkJ HahlbohmH‐D KleinR SchnabelA.The 8‐layered magnetically shielded room of the PTB: design and construction.Proc. of 12th International Conference on Biomagnetism Espoo Finland;2000.
5. Large spherical magnetic shield room.