Affiliation:
1. Department of Nanotechnology Faculty of Engineering University of Guilan Rasht 4199613776 Iran
2. Chemical Engineering Faculty of Engineering University of Guilan Rasht 4199613776 Iran
3. Department of Resin and Additives Institute for Color Science and Technology Tehran 1668836471 Iran
Abstract
AbstractObtaining a polymer nanocomposite with optimum viscoelastic, thermal, and biocompatibility properties is the main objective when designing nanocomposite systems with potential applications in tissue engineering. For this purpose, a blend of Polycaprolactone (PCL) and Polyvinylidene fluoride (PVDF) in an 85/15 weight ratio, along with a nanocomposite reinforced by nanohydroxyapatite (nHA) particles, is fabricated using a solution casting method in a mold. The impact of nHA content on crystallinity, viscoelastic properties, thermal stability, and the properties–structure relationship of nanocomposites is evaluated using scanning electron microscopy (SEM). Dynamic mechanical thermal (DMTA) analysis is used to determine the William–Landel–Ferry (WLF) constants and the effect of nHA on the nanocomposite's viscoelastic behavior. The PCL/15PVDF/0.5 wt% nHA exhibits the maximum thermal stability (40% residual char value) and 95% increase in storage modulus at 90 °C (rubbery region) in comparison with PCL/15PVDF blend. Water contact angle (WCA) and biocompatibility tests are conducted on the PCL/15PVDF blend and nanocomposite scaffolds to design appropriate nanocomposite systems with potential applications in tissue engineering. The high hydrophilic properties are assigned to PCL/15PVDF/0.5 wt% nHA with a WCA of 67.5°. Finally, in vitro cell culture confirmed 0.5 wt% nHA significantly improves cell adhesion and cytotoxicity with MG‐63 cells.