Electrical behavior and water phase transformation in multi‐walled carbon nanotube/polytetrafluoroethylene composite films

Abstract

AbstractMulti‐walled carbon nanotubes (MWCNTs) with excellent physiochemical properties have been recently applied to energy/power generation and storage systems encompassing polymer electrolyte membrane fuel cells (PEMFCs). However, there is a lack of investigations of the properties of MWCNT composites themselves under the actual operating conditions of systems. In this paper, MWCNTs/polytetrafluoroethylene (PTFE) composites were fabricated as electric and hydrophobic components for energy/power systems. The electrical properties, heating behavior, hydrophobicity, and water evaporation behavior of the composites are characterized within the operating voltage ranges of PEMFC. With 50% MWCNT content, the conductivity and the contact angle were 11.83 S/cm, and the contact angle 128.1°, respectively. The MWCNT/PTFE composite film showed a linear temperature rise with voltages and rapid temperature saturation within 40 s. The rate in the initial heating range was measured at 0.5°C/s for the voltage of 0.5 V. The voltage increase induced an exponential decrease in the height of water droplets on the composite surface. The evaporation rate increased almost 10‐fold, from 0.013 mm/min at 0.0 V to 0.12 mm/min at 1.0 V. The proposed characteristics of the functional composite provide insights into the material requirements for electrochemical devices, including PEMFC.Highlights Multi‐walled carbon nanotube/polytetrafluoroethylene composites can be applied to energy storage and power generation. Key properties of the composites are proposed for polymer electrolyte membrane fuel cell (PEMFC) operating conditions. The composite has a fast heating by high conductivity and temperature uniformity. Water‐vapor transformation under PEMFC operating voltage is quantified.