Affiliation:
1. Department of Radiation Oncology and Molecular Sciences Johns Hopkins University Baltimore Maryland USA
2. Department of Radiation Oncology Brown University Providence Rhode Island USA
3. Department of Radiation Oncology University of Minnesota Minneapolis Minnesota USA
4. Department of Radiation Oncology UT Southwestern Medical Center Dallas Texas USA
Abstract
AbstractPurposeA single treatment planning system (TPS) model for matched linacs provides flexible clinical workflows from patient treatment to intensity‐modulated radiation therapy (IMRT) quality assurance (QA) measurement. Since general guidelines for building a single TPS model and its validation for matched linacs are not well established, we present our RayStation photon TPS modeling strategy for matched Elekta VersaHD linacs.MethodThe four linacs installed from 2013 to 2020 were matched in terms of Percent Depth Dose (PDD), profile, output factor and wedge factors for 6‐MV, 10‐MV, 15‐MV, and 6‐MV‐FFF, and maintained following TG‐142 recommendations until RayStation commissioning. The RayStation single model was built to represent all four linacs within the tolerance limits recommended by MPPG‐5.a. The comprehensive validation tests were performed for one linac following MPPG‐5.a and TG‐119 guidelines, and spot checks for the other three. Our TPS modeling/validation method was evaluated by re‐analyzing the previous 103 patient‐specific IMRT/volumetric modulated arc therapy (VMAT) QA measurements with the calculated planar doses by the single model in comparison with the analysis results using four individual Pinnacle TPS models.ResultsFor all energies, our single model PDDs were within 1% agreement of the four‐linac commissioning measurements. The MPPG‐5.a validation tests from 5.1 through 7.5 and all TG‐119 measurements passed within the recommended tolerance limits. The IMRT QA results (mean ± standard deviation) for RayStation single model versus Pinnacle individual models were 98.9% ± 1.3% and 98.0% ± 1.4% for 6‐MV, 99.9% ± 0.1% and 99.1% ± 1.9% for 10‐MV, and 98.2% ± 1.3% and 97.9% ± 1.8% for 6‐MV‐FFF, respectively.ConclusionWe successfully built and validated a single photon beam model in RayStation for four Elekta Linacs. The proposed new validation methods were proven to be both efficient and effective.