Affiliation:
1. Key Laboratory for Waste Plastics Biocatalytic Degradation and Recycling College of Biotechnology and Pharmaceutical Engineering Nanjing Tech University Nanjing P.R. China
2. Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM) Nanjing Tech University Nanjing P.R. China
3. State Key Laboratory of Materials‐Oriented Chemical Engineering Nanjing Tech University Nanjing P.R. China
Abstract
AbstractPolyurethane (PU) is a complex polymer synthesized from polyols and isocyanates. It contains urethane bonds that resist hydrolysis, which decreases the efficiency of biodegradation. In this study, we first expressed the amidase GatA250, and then, assessed the enzymatic characterization of GatA250 and its efficiency in degrading the polyester‐PU. GatA250 degraded self‐synthesized thermoplastic PU film and postconsumption foam with degradation efficiency of 8.17% and 4.29%, respectively. During the degradation, the film released 14.8 µm 4,4′‐methylenedianiline (MDA), but 1,4‐butanediol (BDO) and adipic acid (AA) were not released. Our findings indicated that GatA250 only cleaved urethane bonds in PU, and the degradation efficiency was extremely low. Hence, we introduced the cutinase LCC, which possesses hydrolytic activity on the ester bonds in PU, and then used both enzymes simultaneously to degrade the polyester‐PU. The combined system (LCC‐GatA250) had higher degradation efficiency for the degradation of PU film (42.2%) and foam (13.94%). The combined system also showed a 1.80 time increase in the production of the monomer MDA, and a 1.23 and 3.62 times increase in the production of AA and BDO, respectively, compared to their production recorded after treatment with only GatA250 or LCC. This study provides valuable insights into PU pollution control and also proposes applicable solutions to manage PU wastes through bio‐recycling.